Reassigning Hotkeys
The hotkeys can be reassigned from the Schematic Browser.
1. Select the Search tab | Type in the name of the part you wish to assign the hotkey in the
Name/ Description.
2. Click Find
3. Right click the required part and Select Assign Hotkey.
4. Click on the required number or letter to which the part is to be assigned.
5. Click Accept
- You can change the print settings for a project from EDWinXP Main | Project
| Project Properties | Select Customized diagram settings tab.
- Check the box of “Change” for the required parameter.
- Enter the required value.
- Click on Apply | Accept.
- After taking the print, you can change back to the original values.
- Pinout texts can be made invisible while packaging in the
Option setup.